Load image into Gallery viewer, AffiDYE® GelRed (10,000X)
Load image into Gallery viewer, AffiDYE® GelRed (10,000X)
Load and play video in Gallery viewer, AffiDYE® GelRed (10,000X)

SKU: AFG-VZ-GR501-01

AffiDYE® GelRed (10,000X)

Vendor AffiGEN
Regular price 1 264 SEK
Sale price 1 264 SEK Regular price
Sale Sold out
Unit price
/per 
Shipping calculated at checkout.
Size:
This is a pre order item. We will ship it when it comes in stock.

AffiDYE® GelRed (10,000X)

AffiDYE® GelRed (10,000X) is a novel nucleic acid dye that can replace ethidium bromide (EB). It has many advantages such as high sensitivity and strong thermal stability. It has higher detection sensitivity for trace DNA, especially trace small molecule DNA. Under the ultraviolet light, DNA exhibits red fluorescence. AffiDYE® GelRed is applicable for dsDNA, ssDNA and RNA staining in agarose gels and polyacrylamide gels electrophoresis.

Components:

Components AFG-VZ-GR501-01 AFG-VZ-GR501-02 AFG-VZ-GR501-03
AffiDYE® GelRed 0.5 ml 10 × 0.5 ml 100 × 0.5 ml

Application:

It is applicable for agarose gel electrophoresis of in-gel staining methods (pre-stained gels) and gel soaking methods (post-stained gels), and polyacrylamide gel electrophoresis of gel soaking methods. It is applicable for dsDNA, ssDNA and RNA staining. 

Key Advantages:

Non-toxic: Macromolecular properties of AffiDYE® GelRed (10,000X) prevent penetrating cell membranes into the cells. High sensitivity: Suitable for electrophoresis staining of various sizes and highly sensitive for low concentrations and trace DNA. High stability: Suitable for the Agarose gel prepared by microwave or other heating methods. High SNR: Strong fluorescence signal of the sample with low background signal. Simple operation: This product has the same stability as EB, and does not degrade during precast gel and electrophoresis; the staining process only takes 30 min, and the stained gel can be directly observed or imaged without destaining or washing.

Storage Conditions:

Store at 15 ~ 25°C and protect from light, transport at room temperature.

Notes:

For research use only. Not for use in diagnostic procedures.

  1. The AffiDYE® GelRed is highly sensitive. Please reduce the amount of loaded sample for electrophoresis and the recommended amount is 50 - 200 ng per lane.
  2. When using the in-gel staining method (gel length 5 cm), and this product is used together with Vazyme #AFG-VZ-MD101/AFG-VZ-MD102/AFG-VZ-MD103/AFG-VZ-MD104, if 150 - 180 V, it is recommended that the indicator band runs to 2/3 or the bottom of the gel; if 100 - 120 V, it is recommended that the indicator band runs to the bottom of the gel.
  3. It is recommended to use the gel soaking method for staining to avoid the influence of dyes on nucleic acid migration.
  4. If the separation of the bands is not obvious, it is recommended to use the gel soaking method to confirm whether the migration of nucleic acid is caused by the influence of the dye. If the problem is not resolved after soaking, it is recommended to re-prepare the sample and repeat the experiment.
  5. Store the staining solution at room temperature and protect from light to avoid low temperature precipitation.

Experiment Process:

A. For Agarose Gels

a. Gel soaking method (Post-stained gels, recommendation)

  1. Prepare agarose corresponding to the gel concentration (e.g. 1%, 1 g agarose added to 100 ml 1 × TAE).
  2. Heat in a microwave oven till the agarose melts completely.
  3. Pour the agarose solution into the mold and insert the comb teeth in suitable place. Normally it takes 30 - 60 min at room temperature.
  4. Load samples with a final concentration of 1 × loading buffer and run the gel.
  5. Dilute the AffiDYE® GelRed 10,000X stock with 0.1 M NaCl to make a 3 × AffiDYE® GelRed staining solution. (e.g. add 15 μl of AffiDYE® GelRed 10,000X to 50 ml of 0.1 M NaCl). The staining solution can be used for 3 times and stored at 4°C for one week (protect from light).
  6. Place the gel in a suitable container carefully. Smoothly add sufficient amount of the 3 × AffiDYE® GelRed staining solution to submerge the gel. Agitate the gel gently at room temperature for 15 - 30 min.
  7. The staining time depends on the concentration of agarose and the thickness of gel.

b. In-gel staining method (Pre-stained gels. The same method as EB. It is recommended to use when the amount of DNA is less than 400 ng)

  1. Prepare agarose corresponding to the gel concentration.
  2. Heat in a microwave oven till the agarose melts completely.
  3. Dilute the AffiDYE® GelRed 10,000X stock into the hot agarose gel solution at 1:10,000 and mix thoroughly.
  4. Cast the gel and allow it to solidify. Normally it takes 30 - 60 min at room temperature.
  5. Load samples and run the gel.

B. For Polyacrylamid Gels

  1. Gel soaking method (Post-stained gels)
  2. Prepare agarose corresponding to the gel concentration.
  3. Load samples and run the gels.
  4. Dilute the AffiDYE® GelRed with 0.1 M NaCl to make a 3 × AffiDYE® GelRed staining solution. (e.g. The dye can be reused for 3 times and be stored at 4°C for one week).
  5. Place the gel in a suitable container carefully. Smoothly add a sufficient amount of the 3 × AffiDYE® GelRed staining solution to submerge the gel.
  6. Agitate the gel gently at room temperature for 15 - 30 min. The staining time depends on the concentration of agarose and the gel thickness.

Fig 1. and Fig 2. are AffiDYE® GelRed dye nucleic acid electrophoresis and cell membrane permeability assay (cytotoxicity assay), respectively.

 

Fig 1. The results of AffiDYE® GelRed and standard GelRed nucleic acid gel staining

Fig 2. The results of SYBR Green I (1 ×) and AffiDYE® GelRed (1 ×) stain on 293T cells at 37°C

 

The results show that AffiDYE® GelRed has higher sensitivity under the same experimental conditions. SYBR Green I can penetrate cell membranes quickly and stain DNA in living cells, but AffiDYE® GelRed cannot penetrate cell membranes to stain the nucleus. Therefore, AffiDYE® GelRed is non-cytotoxic, safe and reliable.